Chevybombs.com

ChevyBombs The Forum => Off Topic => Topic started by: Aero47 on September 12, 2018, 06:00:33 PM



Title: Looking for the DIY Engine Cart Thread
Post by: Aero47 on September 12, 2018, 06:00:33 PM
Whatís up guys! Itís been way too long...

Iím trying to track down the thread that had the cart made out wood for the inlines.  I searched the topic but couldnít come up with the DIY thread that was somewhere on here before years back.

Thanks for any help




Sent from my iPhone using Tapatalk


Title: Re: Looking for the DIY Engine Cart Thread
Post by: modiol on September 13, 2018, 11:08:03 AM
here you go, it is on the stovebolt website.

https://www.stovebolt.com/techtips/engine_dolly.html (https://www.stovebolt.com/techtips/engine_dolly.html)


Title: Re: Looking for the DIY Engine Cart Thread
Post by: Aero47 on September 13, 2018, 05:33:32 PM
Thank you! Thatís the one. 


Sent from my iPhone using Tapatalk


Title: Re: Looking for the DIY Engine Cart Thread
Post by: I Drop Bombs on November 14, 2018, 09:00:05 PM
Easy to make Richard. I still use mine to this day that I built from those blue prints. These inline 6's are heavy so the best investment you can make is in heavy duty casters. FYI


Title: Re: Looking for the DIY Engine Cart Thread
Post by: Aero47 on November 19, 2018, 07:40:01 PM
Good stuff! Thanks for the advice Chris. Iím gonna get on it this week


Sent from my iPhone using Tapatalk


Title: Re: Looking for the DIY Engine Cart Thread
Post by: Aero47 on November 19, 2018, 07:41:19 PM
Anyone know if the dimensions would be the same for a 261, when it comes to these carts?


Sent from my iPhone using Tapatalk


Title: Re: Looking for the DIY Engine Cart Thread
Post by: modiol on November 19, 2018, 11:28:37 PM
my understanding is that the outside dimensions of the blocks are the same. 


Title: Re: Looking for the DIY Engine Cart Thread
Post by: Aero47 on November 22, 2018, 02:36:02 PM
Cool, thanks!


Sent from my iPhone using Tapatalk


Title: Re: Looking for the DIY Engine Cart Thread
Post by: Aeroman on January 07, 2019, 01:29:49 AM
Good stuff! Thanks for the advice Chris. Iím gonna get on it this week


Sent from my iPhone using Tapatalk
yes, that's what I used.  As Chris mentioned, don't go cheap on those casters.  I bought a set at Lowes and they were bad.  Hard to roll around.